安徽快3走势

安徽快3走势Hello, welcome to the Zibo Domaster Insulators Co。, Coro。

中文

+ 0533-5582999

suntengyue@gindic.com

内页banner

news

Hot keywords

Contact us

Company Name: Zibo Dao Maison Insulator Co., Ltd.


Contact: Sun Manager


Phone: 0533-5582999


Mobile: 13864314352


Email: suntengyue@gindic.com


安徽快3走势Fax:0533-5781150


Address: No. 1, Suwang Village, Kunlun Town, Zichuan District, Zibo City

Website:      en.gindic.com

What are the characteristics of the suspension rod insulator?

Your current location: Home >> News >> common problem

What are the characteristics of the suspension rod insulator?

Date of release:2018-12-12 Author: Click:

棒式绝缘子.jpg

What are the characteristics of the suspension rod insulator:


(1) High strength and light weight. The composite insulator has a high strength-to-weight ratio, that is, a high specific strength. The high mechanical strength is derived from the excellent mechanical properties of the FRP core rod. The tensile strength of the widely used FRP rods can reach 1000 MPa or more, and the core rod density is only about 2 g/cm3, so the specific strength is high. It is about 5 to 10 times that of high quality carbon steel. At the same voltage level, the composite insulator weighs only 1/7 to 1/10 of the porcelain insulator.


    (2) The wet flashing flash voltage is high. The hydrophobicity of the low energy surface of organic composites is the main reason for the excellent wettability of composite insulators. Under severe meteorological conditions such as heavy fog, light rain, dew, dissolved snow, and dissolved ice, the surface of the composite insulator forms separated water droplets instead of continuous water film. The conductivity of the fouling layer is very low, so the leakage current is also small and hard to occur strongly. The local arc, local arc is also difficult to further develop leading to external insulation flashover. After running for a period of time, the surface area of the composite insulator is stained, and the water repellency can migrate to the surface of the stain layer. The characteristics of the silicone rubber material are unique. Under the same contamination degree, the flashover voltage can reach more than twice the same leakage distance insulator.


The equivalent diameter of the common rod-shaped composite insulator is much smaller than that of the ordinary suspension porcelain insulator and the pillar insulator, which is also an important reason for its excellent stain resistance. Under adverse conditions, water repellency may be reduced or lost due to electrical, environmental and other stresses, but its equivalent diameter will not become thicker, so the flashover voltage will remain at a high level.

(3) Easy operation and maintenance. The excellent anti-fouling performance of organic external insulation improves the reliability of power system operation. It does not need to be cleaned regularly like porcelain and glass insulators in dirty areas. There is no zero-value detection problem of ordinary suspension porcelain insulators, which greatly reduces the insulators in dirty areas. Operation and maintenance costs.




安徽快3走势    (4) It is not easy to break and prevent accidents。 The composite insulator has strong impact resistance, greatly reducing accidental damage caused during installation and transportation, and effectively preventing damage caused by human factors such as shooting。


The address of this article:http://en.gindic.com/news/401.html

Key word:

The last one:None
The next one:Insulator product detail classification

Recently browse:

Related products:

Related news:

  • Service
  • number
    13864312352
  • Message
  • Online Service
    Please leave a message
    Please input the message here, and we will contact you.
    Name
    Name
    Tel
    Tel
    Mailbox
    Mailbox
    Address
    Address
    江苏快3平台 贵州11选5 235棋牌 上海快3走势图 河北快3代理 加拿大28 乐盈彩票APP 广西快3 河北快3走势 江苏快3